How to Convert Portable Basketball Hoop to Inground?

So, are you looking for ways to convert a portable hoop to an inground basketball system?

You have purchased a beautiful hoop but are now not happy with the purchase? It is because your system lacks durability and stability. Or maybe the base broke and you want to turn it into a more permanent solution?

Don’t be embarrassed! This is a valid search, and you will find a solution here. If you are not happy with your portable solution, then you can still make it inground for added stability.

So, don’t worry about how to convert portable basketball hoops to inground, as I have got you covered! Keep reading to learn more…

How To Convert Portable Basketball Hoop To In-Ground

Why Convert Portable Basketball Hoop into an Inground Goal?

That’s a valid question for many!

If you are tired of the hoop falling and crashing, again and again, you need to think of a solution. It is not easy to pull the hoop from the ground often and fix it in the right position.

At such time, converting the same basketball hoop to an inground solution is a pretty valid reason.

Nevertheless, if you have that extra cash lying around, you can still purchase a completely new inground basketball hoop system.

But if you don’t have that type of cash, rectify your mistake of purchasing a portable solution by following some nifty methods laid out in this article!

What Would Be the Cost to Convert Portable Solution to Inground One?

There are some kits available to easily convert the portable basketball hoop to an inground solution.

For instance, if you choose the basketball ProBase inground kit (instructions in this post!), the cost may reach $160 to $180.

On the other hand, if you are cementing the pole in the ground, the cost won’t be much. It will be around $100 to $135.

But if you decide to throw the $1,000 hoop, the inground basketball solution will cost around $1,100 at least. It’s a straight hole in your pocket without damage control.

Control the damage by utilizing your DIY (Do It Yourself) skills. With some tools and solutions on your hand, convert your portable hoop to an inground. Here’s how…

How To Convert Portable Basketball Hoop To In-Ground?

The easiest way to convert portable basketball hoops to inground is by removing the support base from the backboard.

The pole must be cemented to the ground. But here is the rule you need to know! For a 3.5 inches diameter pole, dig a 3.5 feet hole.

Here is a thing to remember! It is not a few hour’s games. You need 7 to 8 hours, or it can even take a day or two. It depends upon your strength and workload.

Then, safety is important more than anything. Even though the whole process is time-consuming but the cost is way less than purchasing a new basketball hoop.

So, without further ado, let us jump on how to convert portable basketball hoop to inground.

Option 1 – Cement Portable Backboard Hoop Pole Directly In The Ground

This is the most straightforward solution! Get some help to start as it’s not a single-man job!

Now, prepare a mixture of cement with water. The ratio should be perfect! Use a screwdriver to dismantle the backboard and the rim from the pole of the portable hoop.

With a shovel dig a hole in the ground. Use a jackhammer if planning to add concrete to the hole. A level is going to help in levelling the hoop once you have poured the cement.

Then use a ladder to attach the backboard of the portable hoop to the pole.

Once you have laid down the hoop and dismantled the backboard and rim, now what’s next? There are two options available:

Dig The Hole

If you desire to maintain the 10 feet height of your rim, go for an extension. Get a long piece of the pole that can fit the original pole, ensuring the required length.

The best plan of action is to get 6 to 7 feet of steel pipe for it.

Tightly adjust both the poles. Now see the diameter of your basketball hoop pole. For instance, the diameter of the pole is 5 inches. Now, dig a 5 feet hole in the ground.

Make sure the pole goes from 2.5 feet to 3.5 feet inside the ground. Use a mixture of cement and water, around 70 pounds for it. Voila! Digging the hole in the ground solution is complete!

Improvised Base

An improvised base can do wonders!

If you are not into digging a hole in the ground, go for an improvised base. It’s a bit messy solution but good for all.

It may not look appealing to go for a cemented base in front of the house. However, if you are planning to go behind your house, an improvised base can do the trick.

Get an old wooden box and fill it with cement and water. The ratio here should also be adjusted well. Now, place the pole in that wooden box. The pole must be levelled in the middle.

Get some help to keep the pole in the centre, and level the rim with your ground.

Now, attach the backboard to the pole carefully with some help. For additional stability, add some more cement to the base once the older one gets dried.

With extreme stability, be ready to get a weird looking inground hoop. If looks don’t matter to you, then this is the easiest solution of all.

Option 2 – Ready-Made Basketball ProBase Is The Best Solution

There is another way to convert portable basketball hoops to inground. A device named ProBase can quickly convert any mobile system to an inground mechanism.

It is an innovative device that can be conveniently slipped over the hoop’s pole.

PROBASE Steel Stand for Portable Basketball Hoop. Replaces Any Kind of Portable Hoop Plastic Base. Give Roots to Your Portable Hoop

With extreme durability and stability, your basketball hoop will have a solid foundation to play the game. And most importantly, it’s a solution without cement.

Follow these steps to ensure the basketball ProBase is installed perfectly:

  • First, choose the location where you desire to keep your hoop. The place must be right behind a solid surface like a curb or driveway pavement.
  • Now, create a pilot hole and start assembling the stake. Tap the block and drive the ProBase into your solid ground.
  • When the ProBase is securely placed in the ground, level the hoop to current the position. You can use any leveller for this task.
  • Carefully attach the basketball hoop to your new ProBase and tighten the screws of the base.

Ta-Da! You are good to go! But if you’re still not sure how to use ProBase, check out the video below for more detailed instructions.

Wrapping Up

There are certain ways to convert portable basketball hoops to inground that are beneficial by all means. Even though they are time-consuming and require helping hands.

But the best part is you don’t have to buy a new system again. It saves the cost, anxiousness of purchasing a new one, and other crises.

Moreover, you get a chance to utilize your DIY skills as well!

But in case you’re not prone to digging holes, mixing cement, and doing all the dirty work, you can opt for the ProBase solution instead.

I would highly recommend it because it takes less than an hour to set it up. It also makes less mess and is movable in case you decide to relocate.

Thanks for hanging with me! Let me know if you have questions 😊

Related Posts:

Leave a Comment